HomeAbout UsProductsServiceContact Us

XP Series | HP Series | U2 Series | U2K Series| PA2 Series | PA4 Series | A2 Series | A4 Series

XP Series Multi-Mode Dual Channel Amplifiers

Our XP Series amplifiers will test your imagination. They feature a built-in electronic 2-way active crossover with variable sweep, 70Hz to 3.5KHz, and 24dB/octave slope. The crossover signals may be fed both to the internal amplifiers and through gain adjusted line balanced outputs to drive slave amplifiers. The XP Series also incorporate a toroidal mains transformer, variable-speed DC fan cooling, Stereo, Parallel, or bridged operation, and balanced inputs via XLR and TRS 1/4" phonejacks. Speaker connections are provided by industry standard SpeakonTM connectors. The XP Series operates in dual channel mode at 4 or 8W or in bridged mode at 8W.

 
Features
 Built-in professional, high-precision mono two-way electronic crossover

  • Easy, one control wide frequency adjustment from 70Hz to 3500Hz.
  • Precision 41 detent potentiometers for accuracy and repeatability.
  • Ultra steep 24db/octave filters.
  • Absolutely flat summed amplitute response, zero phase difference.
  • Adjustable (0º to 180º) phase delay of low frequency to facilitate phase alignment.
  • Individual output level controls.
  • Active balanced buffers to drive many amplifiers simultaneously.
  • Gold-plated XLR and 1/4" TRS Phonejacks.
  • Individual silent output mute switches for easy band adjustment.
  • Individual phase reverse switches to correct pin 2-3 wiring faults.

 Built-n limiter reduces clipping distortion and protects speakers from being overdriven.

 2U (3.5" high) 19" Rack Mountable Chassis

 Touring or fixed installation applications.

 Quicklock connecting SpeakonTM speaker connectors.

 Gold-plated XLR and 1/4" TRS Phonejacks input connectors.

 Powerful, high current, low noise toroidal transformer.

 Quiet, isolated cooling system.

 Symmetrical, modularized design for easy transportation and quick service.

 Front mounted, detent volume controls.

 LED display for signal level (-10dB, -3dB, clip) and speaker protect for each channel.

 Stereo/Parallel and Bridge Mode operation.
 

 

The XP models incorporate an electronic 2-way active crossover with variable sweep and 24dB/octave slope. The crossover signals may be fed both to the internal amplifiers and through gain adjusted line balanced outputs.
Specifications
MODEL XP-20 XP-16 XP-12
Output(program) 4 ohm both Ch. 1200W x 2 1000W x 2 800W x 2
Output(rms) 4 ohm both Ch. 1000W x 2 800W x 2 600W x 2
Output(program) 8 ohm both Ch.

700W x 2

600W x 2 500W x 2
Output(rms) 8 ohm both Ch. 600W x 2 500W x 2 400W x 2
Output(rms) 8 ohm bridged 2000W x 1 1600W x 1 1200W x 1
Input connectors Balanced input 2-Female XLR, 2-Phonejacks (TRS)
Output Conn. (HP) Speaker Out 2-Speakon(tm)
Output Conn. (XP) Speaker Out
Bal. X-over Out 		2-Speakon(tm)
2-Male XLR, 2-Phonejacks (TRS)
Controls (HP) 2-Level, Stereo/Parallel/Bridged, Gnd Lift
Controls (XP) 2-Level, Stereo/Parallel/Bridged, Gnd Lift
Normal/Hi, Normal/Low 2-way Xover
Cooling Two variable speed fans
Protection Turn-on, Short, DC, Over temperature
Status Indicators -10dB, -3dB, Clip, Protect, Power
Freq. response 20Hz~20kHz +0, -0.5dB
Freq. bandwidth 5Hz~50kHz +0, -3 dB
THD Distortion   <0.01%
IM distortion   <0.03%
Input sensitivity   0.775 Vrms
Input impedance   10k ohm
Damping factor   >500
Crosstalk   <-90 dB
Noise   <-105 dB
Slew rate   40V/uS 30V/uS 20V/uS
Voltage gain   36dB 35dB 34 dB
Power supply   3000W 2500W 2000W
Max current draw AC115V(230V) 24(12)A 20(10)A 15(8)A
Dimension 2U Rack 3 1/2"(H) * 19"(W)*15"(D)
Weight lbs (kg) 44 (20) 38 (17) 33 (15)
 
 All specifications subject to change without prior notice
Home | Products | About Us | Service | Contact Us